Flush Pulls for Sliding and Pocket Doors
A flush pull sits recessed into the door so nothing sticks out to catch on, which is exactly what a sliding or pocket door needs. The whole point is that the door can pass into a wall pocket or slide by another panel without a knob getting in the way. Depth and cutout size are what you actually have to match.
Rectangular and round pulls both work; the choice is mostly about the look and the router bit you have. What matters is that the mortise depth suits your door thickness so the pull sits flush and the door still clears.
Emtek Flush Pull Square Brass, 2-1/2" X 2-1/2", Fits Standard 2-1/8" Door Prep, Satin Nickel
From Emtek, this is a flush pull finished in satin nickel.
The listed size is 2-1/2". Match it to the door or opening it serves and confirm the mounting suits your surface.
Emtek Flush Pull Square Brass, 2-1/2" X 2-1/2", Fits Standard 2-1/8" Door Prep, Flat, Matte Black
Emtek offers this as a flush pull, finished in matte black.
The listed size is 2-1/2". It does one job well; the main thing is sizing it to your opening.
Emtek Flush Pull Modern Rectangular, 1-3/4" Width X 4" Length, Flat, Matte Black
The Emtek entry here is a flush pull finished in matte black.
It measures 1-3/4" in the dimension the feed calls out. Check the mounting and dimensions against what you have before ordering.
Emtek Flush Pull Modern Rectangular, 1-3/4" Width X 4" Length, Satin Nickel
From Emtek, this is a flush pull wearing a satin nickel finish.
It measures 1-3/4" in the dimension the feed calls out. It does one job well; the main thing is sizing it to your opening.
Cal-Royal Drive In Finger Pull Without Nails, 2-1/8" Diameter, Bright Polished Brass
Cal-Royal offers this as a flush pull, finished in bright polished brass.
It measures 2-1/8" in the dimension the feed calls out. Match it to the door or opening it serves and confirm the mounting suits your surface.
Cal-Royal Drive In Finger Pull Without Nails, 2-1/8" Diameter, Antique, Satin Brass Blackened
The Cal-Royal entry here is a flush pull finished in satin brass blackened.
It measures 2-1/8" in the dimension the feed calls out. Check the mounting and dimensions against what you have before ordering.
Choosing well
Match the cutout and depth to your door, pick a finish that ties into the rest of the room, and you get a pull that disappears until you need it. Understated, but it is the right tool for a door that slides.
At a glance: how these compare
| Product | Brand | Finish | Type | Key detail |
|---|---|---|---|---|
| Emtek Flush Pull Square Brass, 2-1/2" X 2-1/2", Fits Standard 2-1/8" Door Prep, Satin Nickel | Emtek | Satin Nickel | flush pull | 2-1/2" |
| Emtek Flush Pull Square Brass, 2-1/2" X 2-1/2", Fits Standard 2-1/8" Door Prep, Flat, Matte Black | Emtek | Matte Black | flush pull | 2-1/2" |
| Emtek Flush Pull Modern Rectangular, 1-3/4" Width X 4" Length, Flat, Matte Black | Emtek | Matte Black | flush pull | 1-3/4" |
| Emtek Flush Pull Modern Rectangular, 1-3/4" Width X 4" Length, Satin Nickel | Emtek | Satin Nickel | flush pull | 1-3/4" |
| Cal-Royal Drive In Finger Pull Without Nails, 2-1/8" Diameter, Bright Polished Brass | Cal-Royal | Bright Polished Brass | flush pull | 2-1/8" |
| Cal-Royal Drive In Finger Pull Without Nails, 2-1/8" Diameter, Antique, Satin Brass Blackened | Cal-Royal | Satin Brass Blackened | flush pull | 2-1/8" |
Finishes and details above come from the current product listings. No pricing is shown here because feed prices go stale fast; check the retailer for the latest.
Hiring a locksmith instead?
Our directory lists locksmith shops in every US state with their public address, phone, and website, so you can call a real local business instead of a lead broker.
Find a locksmith near you
